Construction inspector Interview Questions
80
Construction Inspector interview questions shared by candidates
what would you do upon encountering a situation where a cross culvert pipe was right at the required subgrade level?
3 Answers↳
After it has been cast, then the edge is given clay and flush the water after staying one night. The goal is not to break. Interview Question Road Construction Inspector InterviewRichmond, VA Less
↳
Interview
↳
Covet with stone and prep forconcrete
What does PPE stand for and give me two examples of it.
2 Answers↳
Personal Protective equipment, safety glasses & hard hat
↳
Personal protective equipment Latex gloves and mask
What are your people skills and what languages do you speak?
3 Answers↳
I have managed people in the import/export, distribution and logistics industry for the last 15 years. I am bilingual and am fluent in both English and Spanish and have worked with diverse work forces and unionized labor over the last 15 years. Less
↳
I have good communication skills and socializing with people. English
↳
My language urdu ha in englisa
What are your short term and long term goals?
2 Answers↳
I am looking for a placw o may call my home of establishment that will lead my life into another field of happiness. I am highly skilled in communications and ready to endure any feat. Less
↳
I'm Looking to expand my field of interest I started as a CM, Then SSHO, Now Site Superintendent and I want to work my way up as a Project Manager Less
There were no interview questions.
2 Answers↳
na
↳
Really good lessons to get into top tech companies: bit.ly/faang100
Technical questions asked included: 1) What are the specific things that you should check for (in terms of quality control and safety) when laying asphalt for roads? 2) What are the specific things that you should check for (in terms of quality control and safety) when pouring concrete?
1 Answers↳
1) for laying of asphalt the following should be checked :- compaction ratio of surface, tack coat/priming layer done, etc 2) reinforcement bars as per drawings, cover to bars at sides and bottoms, formworks, etc Less
What were my background and my fit for the position
1 Answers↳
I described my qualifications and my experience