Drilling Engineer Interview Questions
156
Drilling Engineer interview questions shared by candidates
A well producing with a GOR of X STB/Mscf and X" casing is producing from a reservoir with x perm and y porosity. The reservoir is sandstone. Viscosity of oil is x cP. There was other information as well (but I cannot remember because it has been a few years). How would you maximize the recovery from this well?
3 Answers↳
Be prepared to know oil fluid characteristics. You should know how to identify a black oil/volatile oil/dry gas/wet gas/etc. They wanted to see my thought process in this problem. Everytime I gave an answer they would ask follow up questions to see if I understood. I mentioned something about waterflooding, and asked several follow up questions about relative permeability, mobility ratio, etc. It is not difficult, but be prepared for basic petroleum engineering concepts, and DO NOT pretend to know if you do not (i.e., give BS). Less
↳
I think, here we're interested in knowing in which regime the reservoir is producing. If we assume steady-state flow, then the pressure is already being maintained high enough through the effect of aquifer or waterflooding for instance. We need to know exact GOR value also to identify if it's black oil or volatile oil or maybe dry gas reservoir. If it's heavy oil or bitumen, one should be inclined to carry out thermal EOR processes, or if it's lighter oil miscible multicontact flooding can be considered. If it's gas reservoir injecting gas thrugh the gas cap can be considered provided the reservoir is thick enough to avoid high GOR value at the surface. However, in each case increasing permeability through perforations can work also. One important factor also is Skin factor. If it's positive, it needs to be reduced through acidizing for instance. I mean, the problem has different options, different answers. Less
↳
I think, here we're interested in knowing in which regime the reservoir is producing. If we assume steady-state flow, then the pressure is already being maintained high enough through the effect of aquifer or waterflooding for instance. We need to know exact GOR value also to identify if it's black oil or volatile oil or maybe dry gas reservoir. If it's heavy oil or bitumen, one should be inclined to carry out thermal EOR processes, or if it's lighter oil miscible multicontact flooding can be considered. If it's gas reservoir injecting gas through the gas cap can be considered provided the reservoir is thick enough to avoid high GOR value at the surface. However, in each case increasing permeability through perforations can work also. One important factor also is Skin factor. If it's positive, it needs to be reduced through acidizing for instance. I mean, the problem has different options, different answers. Less
Would you be able to relocate to Norway?
2 Answers↳
Yes, I will be able for a relocation.
↳
what kind of technical questions did they ask ? was there any written test ?
Why do you want to work here? Do you own a house or have lots of monthly expenses?
2 Answers↳
Yes , I have a house and mortgage. We do have lots of monthly expenses.
↳
Yes
What would it take to get you to come to work for us.
1 Answers↳
15% raise over current salary and $100,000 signing bonus
all about drilling, completion, rig evaluation, rig contract, bit selection, bit program, casing program, drilling fluid design
1 Answers↳
easy
