Vfx Coordinator Interview Questions


Vfx Coordinator interview questions shared by candidates

Top Interview Questions

Sort: Relevance|Popular|Date
VFX Artist was asked...14 November 2019

Why do you want to work with us?

2 Answers

I see this opportunity as a way to contribute to an exciting/forward-thinking/fast-moving company/industry, and I feel I can do so by/with my … ” “I feel my skills are particularly well-suited to this position because … ” “I believe I have the type of knowledge to succeed in this role and at the company👍🏻 Less

I see this opportunity as a way to contribute to an exciting/forward-thinking/fast-moving company/industry, and I feel I can do so by/with my … ” “I feel my skills are particularly well-suited to this position because … ” “I believe I have the type of knowledge to succeed in this role and at the company👍🏻 Less

will you stay with us for a long time or not

1 Answers

if i like the place and work, then ya will stay for a long time

Prime Focus
VFX Artist was asked...11 September 2014

What are the various compositing functions in Nuke?

1 Answers

1. B PIPE Keep every layer operation piping in to the B pipe stream (your main branch) - this means, among other benefits, you can dissable the merge and the image stream will still flow. In terms of include/exclude mask ops like the popular in Shake 'inside' and 'outside' - you will have to get used to using 'mask' and 'stencil'. 2. BBOX Make sure you are optimising your bounding box on any element you have in the comp. If the image is full frame, take care it doesn't grow larger (from blurs, transforms etc) than the full format, and if it smaller than full frame make sure you have a bounding box that sits tightly around the element. When merging it is important to chose the 'set bbox to' option that is the most optimised for what you are trying to achieve, with the goal of the smallest bbox possible as paramount. If it is a CG pass, your 3D department should be rendering exr's with bounding boxes built in, but if not then you can create them yourself. AutoCrop can analayse zero data pixels in a frame and drawn a bounding box around the element. You will then need to take this AutoCrop data and copy that data into a crop node to make use of this data. When rendering out and exr file sequence, of say a precomp of an element, you can check the autocrop option on the write node. Bear in mind that his option only appears when you are rendeirng out exrs. This is quite a slow process as it consumes quite a bit of memory, but the beauty is that if you do it once, you won't need to do it again and when you bring in the sequence as a read node you will now have the bounding box baked in. 3. CONCATENATING TRANSFORMS Geometric transforms should concatenate to retain the integrity of your plates and elements. Why? Ultimately whenever you filter pixels (transforms, convolves / blurs etc) You are approximating new pixels with filter algorithms that are essentially a visual cheat, and a cheat that degrades the image integrity - albiet normally ever so slightly but if these degradations pile up on top of each other you start to see unwanted artifacts in your plates / elements. Concatenate means that the mathmatics behind multiple transform nodes can be 'folded' into one operation. It is useful to have multiple transform nodes to have the upmost control of transform operations, and the 3d environment in Nuke will concatenate with 2d transforms. Say you wanted move an element around but have independent control on movement in X/Y, scale and rotate. By splitting these operations into three transform nodes you can have total control on adjusting, removing or just quickly disabling these now independent transforms. If Nuke didn't concatenate the three transforms, you would be degrading the image every transform. Luckily it does, but only if you follow the golden rule: keep transforms one after each other and don't 'break' them by placing color correction nodes or merges between them! In Shake, there was a handy green line that would appear connecting transform nodes to give you visual feedback that your transforms were concatenation, alas Nuke doesn't do this (yet? hopefully!). 4. CARD3D Use Card3D's when you can instead of cards in a 3D setup with a scanline renderer. Much, much faster to render and you are essentially doing the same thing if you just have a single card. 5. BLUR INSTEAD OF DEFOCUS Although Nuke's Defocus node is pretty fast, a blur beats it for speed. And you should only need to use the defocus node when you want optical 'bokeh' effects (the blooming of highlights when defocused. Don't use defocus nodes on mattes, or to just soften images when you aren't after the said optical effect. 6. EXPOSURE = MULT This isn't really an optimisation but remember that the exposure node is only a RGB multiply grade operation like the mult in a grade node, only difference is that the parameters are to an exposure scale. Handy if you are used to working in stops or printer lights, or if you have been instructed by your superviso Less

Picture Shop
Vfx was asked...5 December 2017

Describe a time you had to meet a difficult deadline.

1 Answers

In my last job, I was responsible for a project (trailer work). My client wanted the trailer to be on air in the morning. I was working on this leading shot. It was late at night. Without any hesitation, I finished the part ASAP! The client/supervisor was happy with my work. Happy Ending Less

Saber Interactive

Can you show us the shader you made?

1 Answers

I showed the shader and explained

VFX Artist was asked...18 November 2018

Are you willing to relocate?

1 Answers

Yes, No problem at all.

Twentieth Century Studios

How confident are you with multi-tasking and stressful situations?

1 Answers

I used my past jobs, even jobs from my uni days to explain the different levels of stress that I have been exposed to. I also explained how these shaped who I was as a professional. I also went into detail with my experience in working across multiple projects to help strengthen my ability to multitask with the interviewers Less

Twentieth Century Studios

What software and database platforms are you familiar with?

1 Answers

I listed the various software and explained my level of experience with each. The main one they were interested in at the time was Filemaker Pro. Less

Twentieth Century Studios

Would you be interested in relocating to London for Post Production?

1 Answers

I answered yes and explained that I have a dual citizenship so no visa would be required if I was to relocate Less

Riot Games

what is the best for player and team work

1 Answers

Play and know lol mechanics seriously.

Viewing 1 - 10 of 144 interview questions

See Interview Questions for Similar Jobs

digital coordinatorvfx artistproduction coordinator

Glassdoor has 144 interview questions and reports from Vfx coordinator interviews. Prepare for your interview. Get hired. Love your job.